Removing and i nst alling compone nts
during servicing
Removing and installing the har
ddisk
Removing a cover
► Remove the battery (see Chapter "Removing a battery", Page 25).
1
2
► Remove the screw (1).
Keep the screws in a sa fe place. If you are removing more than one compo nent at
the same time, store the screws for the individual compo nents separately from each
other. If you install the wrong screws, components may be damaged.
► Lift the cover off the notebook (2).
A26391-K214-Z200-1 -7619 , edition 1 47
To Next Page
Loading...
