Removing and i nst alling compone nts
during servicing
Removing a cover
1
2
► Remove the screw (1).
Keep the screws in a sa fe place. If you are removing more than one compo nent at
the same time, store the screws for the individual componen ts separate from each
other. If you install the wrong screws, components may be damaged.
► Lift the cover off the notebook (2).
Removing memory modules
3
2
1
1
► Carefully pus
h the two mounting
clips outward
s(1).
MemoryexpansionMemorymodule
The memory module snaps upwards (2).
► Pull the memory m
odule out of its slot
in the direction
of the arrow (3).
A26391-K214-Z200-1 -7619 , edition 1 45
To Next Page
Loading...
