Fujitsu ScanSnap S1300 User Manual

Setting the ScanSnap (for Mac OS users)
182
z [Application] tab
- Application to be used with the ScanSnap
z [Save] tab
- Folder in which scanned image data is saved
- File name used for saving the scanned image data
z [Scanning] tab
- Scanning
(Which image quality to scan with, use color, gray or black & white, simplex or
duplex modes for scanning, enable or disable [Setting for text only document],
[Allow automatic blank page removal], [Correct skewed character strings
automatically], [Allow automatic image rotation], and [Continue scanning after
current scan is finished].)
z [File option] tab
- File format of the scanned image data (*.pdf, *.jpg)
- Whether to perform text recognition on a marked character string in the scanned
image data and set the character string as a keyword for the PDF file
(Whether to perform text recognition only on the first marked section or all marked
sections to be added as keywords, and in which language to perform text recogni-
tion.)
- Whether to perform text recognition on character strings in the scanned image
data to convert the file to a searchable PDF file
(Whether to convert all pages or the first page only, and in which language to
perform text recognition.)
- Whether to include all scanned image data in a single PDF file, or create PDF
files, each with a preset number of pages
z [Paper] tab
- Paper size of documents
(paper size detection)
- Whether to detect multifeed
z [Compression] tab
- File size of the scanned image data (compression rate)
4. Click the [Apply] button.
D Scan settings are changed.
Scan settings vary depending on the scanning method.
For information on items that can be set, refer to "Setting Items With/Without the Quick
Menu" (page 311).
When you press the [Scan] button on the ScanSnap while the ScanSnap setup window is
displayed, the ScanSnap setup window closes and scanning starts. Changes made up to
this point are saved and documents are scanned by these settings.
Note that when other windows are open, scanning does not start even if you press the
[Scan] button on the ScanSnap.

Fujitsu ScanSnap S1300 Specifications

General

Film scanning	No
Color scanning	Yes
Maximum scan size	216 x 360 mm
Scanner type	Sheet-fed scanner
Sensor type	CIS
ISO A-series sizes (A0...A9)	A4, A5, A6
ISO B-series sizes (B0...B9)	B5, B6
Maximum ISO A-series paper size	A4
Auto document feeder (ADF) input capacity	10 sheets
USB version	2.0
Standard interfaces	USB 2.0
Scan media weight	64 - 104.7 g/m²
Dimensions (WxDxH)	284 x 99 x 77 mm
Power requirements	AC 100 - 240V, 50/ 60 Hz
Non-operating relative humidity (non-condensing)	20 - 80 %
Minimum RAM	512 MB
Minimum storage drive space	2197 MB
Sustainability certificates	ENERGY STAR
Power consumption (standby)	5 W
Power consumption (typical)	9 W
Operating temperature (T-T)	5 - 35 °C
Certification	RoHS

Weight and Dimensions

Depth	99 mm
Width	284 mm
Height	77 mm
Weight	1400 g