Fujitsu ScanSnap S1300

Using the ScanSnap in Various Ways (for Mac OS users)
240
Using the ScanSnap in Various Ways
This section explains how to use the ScanSnap in various ways.
■ Scanning Only One Side of a Document
By default, pressing the [Scan] button performs scanning in Duplex mode.
When you want to scan in Simplex mode, change the settings by following the procedure
below.
1. Select [Settings] from the ScanSnap Manager menu.
Refer to "ScanSnap Manager Menu" (page 170) for more information about the
ScanSnap Manager menu.
D The ScanSnap setup window appears.
2. Select [Simplex Scan (Single-sided)] from the [Scanning side] pop-up
menu in the [Scanning] tab.
3. Click the [Apply] button in the ScanSnap setup window.