Fujitsu ScanSnap S1300 User Manual

About Actions (for Windows users)
130
■ Saving to Rack2-Filer
This section explains how to save PDF files created with the ScanSnap in Rack2-Filer trial
version (bundled with the ScanSnap) or Rack2-Filer (V5.0 or later recommended) (bundled
model or sold separately).
z Rack2-Filer trial version (bundled with the ScanSnap) or Rack2-Filer (V5.0 or later
recommended) (bundled model or sold separately) is required to use this function.
Rack2-Filer is a software program that converts paper documents and electronic documents
into PDF files and manages them in a computer. You can manage the documents as if you
bind them, store them on a cabinet shelf, and browse them as if you flip through a book.
z The following settings in ScanSnap Manager are disabled when the scanned image data is
saved to Rack2-Filer:
- Rename file after scanning
- Color high compression
z For information on how to use Rack2-Filer, refer to the Rack2-Filer User's Guide.

Fujitsu ScanSnap S1300 Specifications

General

Film scanning	No
Color scanning	Yes
Maximum scan size	216 x 360 mm
Scanner type	Sheet-fed scanner
Sensor type	CIS
ISO A-series sizes (A0...A9)	A4, A5, A6
ISO B-series sizes (B0...B9)	B5, B6
Maximum ISO A-series paper size	A4
Auto document feeder (ADF) input capacity	10 sheets
USB version	2.0
Standard interfaces	USB 2.0
Scan media weight	64 - 104.7 g/m²
Dimensions (WxDxH)	284 x 99 x 77 mm
Power requirements	AC 100 - 240V, 50/ 60 Hz
Non-operating relative humidity (non-condensing)	20 - 80 %
Minimum RAM	512 MB
Minimum storage drive space	2197 MB
Sustainability certificates	ENERGY STAR
Power consumption (standby)	5 W
Power consumption (typical)	9 W
Operating temperature (T-T)	5 - 35 °C
Certification	RoHS

Weight and Dimensions

Depth	99 mm
Width	284 mm
Height	77 mm
Weight	1400 g