Fujitsu ScanSnap S1300

Installation Specifications
315
Installation Specifications
The following table summarizes the installation specifications of the ScanSnap:
Item Specification
Dimensions (Width × Depth × Height) Minimum: 284 × 99 × 77 (mm) / 11.2 × 3.9 × 3.1
(in.)
(when ADF paper chute (cover) is closed)
Maximum: 284 × 231 × 240 (mm) / 11.2 × 9.1 × 9.4
(in.)
(when ADF paper chute cover is open and the
extension is extended)
Weight 1.4 kg (approx. 3.08 lb.)
Input power Voltage Power cable
connection
100 - 240 V (varies regionally)
USB bus power cable
connection
5 V (the computer must have two USB ports: one
for power connection and the other one for USB
cable connection)
Number of phases Single phase
Frequency 50/60 Hz
Power consumption Power cable
connection
During operation: 9.0 W or less
During standby: 3.2 W or less
USB bus power cable
connection
During operation: 5.0 W or less
During standby: 2.0 W or less
Temperature
/humidity
allowable
ranges
Temperature During operation: 5 to 35 °C / 41 to 95 °F
During standby: -20 to 60 °C / -4 to 140 °F
During storage/transportation: -20 to 60 °C / -4 to
140 °F
Humidity During operation: 20 to 80%
During standby: 8 to 95%
During storage/transportation: 8 to 95%
284 mm (11.2 in.) 231 mm (9.1 in.)
240 mm
(9.4 in.)