Fujitsu ScanSnap S1300 User Manual

System Requirements
20
System Requirements
The system requirements for the ScanSnap are as follows:
■ Windows
zOperating system
- Windows 7
- Windows Vista
- Windows XP
- Windows 2000
OK: Supported
*1 : Service Pack 2 or later required
*2 : Service Pack 4 or later required
zComputer
zMemory
- Windows 7 32 bit
1 GB or more
- Windows 7 64 bit
2 GB or more
- Windows Vista/Windows XP/Windows 2000
512 MB or more (1 GB or more recommended)
zDisplay resolution
800 × 600 or higher is required.
Bundled software Windows 7
Windows
Vista
Windows
XP
(*1)
Windows
2000
(*2)
ScanSnap Manager OK OK OK OK
ScanSnap Organizer OK OK OK OK
CardMinder OK OK OK OK
ABBYY FineReader for ScanSnap OK OK OK OK
Scan to Microsoft SharePoint OK OK OK OK
Recommended : Intel
®
Core™ 2 Duo 2.2 GHz or higher
Minimum : Intel
®
Pentium
®
4 1.8 GHz
When the font size is large, some screens may not be displayed properly.
In that case, use a smaller font size.

Fujitsu ScanSnap S1300 Specifications

General

Film scanning	No
Color scanning	Yes
Maximum scan size	216 x 360 mm
Scanner type	Sheet-fed scanner
Sensor type	CIS
ISO A-series sizes (A0...A9)	A4, A5, A6
ISO B-series sizes (B0...B9)	B5, B6
Maximum ISO A-series paper size	A4
Auto document feeder (ADF) input capacity	10 sheets
USB version	2.0
Standard interfaces	USB 2.0
Scan media weight	64 - 104.7 g/m²
Dimensions (WxDxH)	284 x 99 x 77 mm
Power requirements	AC 100 - 240V, 50/ 60 Hz
Non-operating relative humidity (non-condensing)	20 - 80 %
Minimum RAM	512 MB
Minimum storage drive space	2197 MB
Sustainability certificates	ENERGY STAR
Power consumption (standby)	5 W
Power consumption (typical)	9 W
Operating temperature (T-T)	5 - 35 °C
Certification	RoHS

Weight and Dimensions

Depth	99 mm
Width	284 mm
Height	77 mm
Weight	1400 g