Fujitsu ScanSnap S1300

About Actions (for Mac OS users)
199
Using the Quick Menu
1. Load the document in the ScanSnap.
For details, refer to "Paper Sizes of Documents" (page 26) and "How to Load
Documents" (page 28).
2. Press the [Scan] button on the ScanSnap.
D Scanning starts.
D When scanning is completed, the Quick Menu appears.
3. Click the [Scan to Folder] icon.
D The [Scan to Folder] window appears.
To use the Quick Menu, you need to select the [Use Quick Menu] checkbox in the ScanSnap
setup window.
Refer to "Using the Quick Menu" (page 173) for more details about how to perform scanning by
using the Quick Menu.