Fujitsu ScanSnap S1300 User Manual

About Actions (for Mac OS users)
223
7. Click the [Scan to Word] or [Scan to Excel] icon.
D The following window appears and conversion is started.
D When the conversion is completed, Word or Excel starts up, displaying the converted
document in the applicable format.
When [JPEG(*.jpg)] is selected for [File format] in the [File option] tab in the ScanSnap
setup window, scanned data cannot be converted into a Word or Excel file. If you click
either of these icons, an error message will appear.
z It is recommended to select [Better (Color/Gray: 200 dpi, B&W: 400 dpi)] or higher
resolution for [Image quality] in the [Scanning] tab in the ScanSnap setup window.
z Word documents are saved in RTF format (.rtf) and Excel documents, in XLS format
(.xls).
z You cannot perform scanning when the Quick Menu is displayed. Wait until the conver-
sion is over to scan another document.
z Do not move, delete, or rename the scanned image data in other applications while the
Quick Menu is displayed.

Fujitsu ScanSnap S1300 Specifications

General

Film scanning	No
Color scanning	Yes
Maximum scan size	216 x 360 mm
Scanner type	Sheet-fed scanner
Sensor type	CIS
ISO A-series sizes (A0...A9)	A4, A5, A6
ISO B-series sizes (B0...B9)	B5, B6
Maximum ISO A-series paper size	A4
Auto document feeder (ADF) input capacity	10 sheets
USB version	2.0
Standard interfaces	USB 2.0
Scan media weight	64 - 104.7 g/m²
Dimensions (WxDxH)	284 x 99 x 77 mm
Power requirements	AC 100 - 240V, 50/ 60 Hz
Non-operating relative humidity (non-condensing)	20 - 80 %
Minimum RAM	512 MB
Minimum storage drive space	2197 MB
Sustainability certificates	ENERGY STAR
Power consumption (standby)	5 W
Power consumption (typical)	9 W
Operating temperature (T-T)	5 - 35 °C
Certification	RoHS

Weight and Dimensions

Depth	99 mm
Width	284 mm
Height	77 mm
Weight	1400 g