About Actions (for Mac OS users)
231
3. Click the [Apply] button in the ScanSnap setup window.
4. Click the [ ] button in the upper left corner or press the [esc] key to
close the ScanSnap setup window.
5. Load a business card in the ScanSnap.
z Load the business card so that the front side faces the ADF paper chute (cover).
z To scan multiple business cards, load business cards in a pile.
z Move the side guides so that there is no gap between the edge of the business card
and the side guides on both sides.
6. Press the [Scan] button on the ScanSnap.
D Scanning starts.
D When scanning is completed, the Cardiris window appears.
The ScanSnap setup window also closes when you press the [Scan] button on the
ScanSnap.
To Next Page
Loading...
