Fujitsu ScanSnap S1300

Using the ScanSnap in Various Ways (for Mac OS users)
251
3. Select [None] in [Multifeed Detection] pop-up menu.
4. Click the [Apply] button in the ScanSnap setup window.
5. Click the [ ] button in the upper left corner or press the [esc] key to
close the ScanSnap setup window.
6. Load documents in the ScanSnap.
1. Align the edges of documents.
Scanning documents of different widths or lengths at the same time with [Check Length]
selected results in scan failure due to detection of these documents as multifeeds. Note
that scanning Letter and A4 size documents together at the same time does not result in
multifeed detection.