Fujitsu ScanSnap S1300

Setting the ScanSnap (for Windows users)
60
Changing Settings for Saved Profiles
1. Select [Scan Button Settings] from the Right-Click Menu.
Refer to "Right-Click Menu" (page 41) for more information about the Right-Click Menu.
D The ScanSnap setup dialog box appears.
2. Clear the [Use Quick Menu] check box.
3. Select the profile you want to change from the [Profile] drop-down list.
4. Change the scan settings in each tab in the ScanSnap setup dialog box.
For details about each tab, refer to the ScanSnap Manager Help.
This function is not available when the [Use Quick Menu] check box is selected.