Fujitsu ScanSnap SV600

6. Click the [ ] button at the upper left of the window to close the ScanSnap
setup window.
7. Place a document with the scanned side face-up in the scan area of the
ScanSnap.
For details, refer to "How to Place Documents" (page 53).
8. Press the [Scan] button on the ScanSnap.
a Scanning starts after the time period specified in [Waiting time] passes.
9. Place the next document to be scanned with the scanned side face-up in the
scan area.
For details, refer to "How to Place Documents" (page 53).
a Scanning starts after the time period specified in [Scan interval] passes.
HINT
To continue scanning, repeat step 9.
10. To finish scanning, click the [Finish Scanning] button or press the [Stop]
button on the ScanSnap.
Scanning Documents Using Timed Mode
84