EasyManua.ls Logo

Fujitsu SPARC Enterprise M3000

Fujitsu SPARC Enterprise M3000
144 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
90 SPARC Enterprise Mx000 Servers Product Notes for XCP Version 1121 February 2016
setnameserver
(8) command
For the domainname operand, description is updated as follows:
Specifies the domain name of the DNS search path to be
registered or deleted. You can specify up to five domain names,
each separated by a space. domainname is specified in up to 254
characters with label elements delimited by a "." (period). If a
domain name exceeding 254 characters is specified, an error
occurs. The label element of the domain name can contain letters
(a to z, A to Z), numbers (0 to 9), and the special characters "-"
(hyphens) and "." (period). The domain name must begin with a
letter and end with either a letter or number. A "." (period) can
be used as delimiter.
SPARC Enterprise
M3000/M4000/M5000/
M8000/M9000 Servers
XSCF Reference Manual
setntp(8),
showntp(8)
command
For the address operand, a part of description is updated as
follows:
A host name is specified in up to 64 characters with label
elements delimited by a "." (period). The label element of the
host name can contain letters (a to z, A to Z), numbers (0 to 9),
and the special characters "-" (hyphens) and "." (period). The host
name must begin with a letter and end with either a letter or
number. A "." (period) can be used as delimiter. Host name, if
specified, must be resolvable.
setpasswordpo
licy(8)
command
The following description for the initial setting of -m minlen will
be added:
The initial setting is 9.
setupfru(8)
command
The following description also applies to M4000/M5000 servers:
Although a CMU with two CPUs can be configured into Quad-
XSB mode on an M8000/M9000 server, the server generates a
"configuration error" message for those XSBs that do not have a
CPU and memory.
showhardconf
(8) command
In DESCRIPTION, "External I/O Expansion Unit information"
and "PCI card information" are added with the following note:
(displayed only while the domain power is on)
TABLE 3-12 Software Documentation Updates (Continued)
Title Page Number Update

Table of Contents

Other manuals for Fujitsu SPARC Enterprise M3000

Related product manuals