Fujitsu SPARC Enterprise M3000

Chapter 3 Information About Software 95
Miscellaneous Information
Identifying Degraded Memory in a System
1. Log in to XSCF.
2. Type the following command:
The following example identifies that DIMM number 00A on CMU#3 has
degraded memory.
Identifying Different Memory Sizes in a System
Board
To identify if the domain contains system boards with different memory sizes, you
can use either of the following commands to display the list of memory sizes:
■ showdevices(8) command on the XSCF
■ prtdiag(1M) command on the domain
▼ Using the showdevices Command
1. Log in to XSCF.
XSCF> showstatus
XSCF> showstatus
CMU#3 Status:Normal;
* MEM#00A Status:Degraded;