EasyManua.ls Logo

Fujitsu SPARC Enterprise M3000

Fujitsu SPARC Enterprise M3000
144 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chapter 3 Information About Software 69
Oracle Solaris OS Issues Fixed in Oracle Solaris 10
10/08
TABLE 3-9 lists issues that have been fixed in Oracle Solaris 10 10/08 OS. You might
encounter them in supported releases earlier than Oracle Solaris 10 10/08.
TABLE 3-9 Oracle Solaris OS Issues Fixed in Oracle Solaris 10 10/08
CR ID M3000
M4000
M5000
M8000
M9000 Description Workaround
6511374 O O Unexpected error messages may be
displayed on console after changing
the system configuration.
Example:
WARNING: Translation error
source /LSB0/B0/0, PA
3c000000000, target
/LSB0/B0/20000000
This has been fixed in patch 137137-
09.
[Workaround]
This message can be safely ignored.
6533686 O O When XSCF is low on system
resources, DR operations involving
relocating permanent memory, such as
deleteboard(8) or moveboard(8),
might fail with one or more of these
errors:
SCF busy
DR parallel copy timeout
This applies only to Quad-XSB
configured system boards hosting
multiple domains.
This has been fixed in patch 138397-
01.
[Workaround]
Retry the DR operation at a later time.
6535018 O In Oracle Solaris domains that include
SPARC64 VII processors, workloads
that make heavy use of the Oracle
Solaris kernel might not scale as
expected when you increase the
thread count to a value greater than
256.
This has been fixed in patch 137111-
01.
[Workaround]
For Oracle Solaris domains that
include SPARC64 VII processors, limit
domains to a maximum of 256
threads.
6608404 O Hot-plug of the PCIe Quad-port
Gigabit Ethernet UTP Low Profile
Adapter (X4447A-Z) in slot 1 might
cause other network devices to fail.
To avoid the defect, do not install this
adapter in slot 1.

Table of Contents

Other manuals for Fujitsu SPARC Enterprise M3000

Related product manuals