8 SPARC Enterprise Mx000 Servers Product Notes for XCP Version 1121 • February 2016
Notes and Limitations
This section describes the notes and limitations at the time of this release.
Limitations for SPARC64 VII+ and SPARC64 VII
Processors
You must complete the upgrades to the XCP and to Oracle Solaris OS before
installing the CPU/memory board unit which is mounted with the SPARC 64 VII+
and SPARC64 VII processors on your server.
Notes on Secure Socket Layer (SSL) 3.0
Due to security reasons, SSL 3.0 cannot be used with XCP 1119 or later. Use
Transport Layer Security (TLS) 1.0.
Notes on Active Directory
■ While Active Directory is enabled, when you attempt to login to XSCF via the
telnet, you might fail to login due to timeout of the query to secondary alternated
server or later.
■ If the specified timeout is too brief for the configuration, the login process or
retrieval of user privilege settings could fail. In such case, specify larger value for
the timeout and then execute again.
Notes on LDAP/SSL
If the specified timeout is too brief for the configuration, the login process or
retrieval of user privilege settings could fail. In such case, specify larger value for the
timeout and try again.
To Next Page
Loading...
