Fujitsu SPARC Enterprise M3000

17
CHAPTER
3
Information About Software
This section describes the special instructions and the issues about the
M3000/M4000/M5000/M8000/M9000 servers software.
■ “Notes and Limitations” on page 17
■ “XCP Issues and Workarounds” on page 18
■ “Oracle Solaris OS Issues and Workarounds” on page 56
■ “Software Documentation Updates” on page 84
■ “Miscellaneous Information” on page 95
Notes and Limitations
Notes on RCI Function
The RCI function is supported on any of the following servers.
■ The server which you purchased in Japan from Fujitsu
■ The server which is bearing the Fujitsu logo on the front surface, regardless of
area of purchase
1
When using the RCI function such as RCI build procedure, see the SPARC Enterprise
M3000/M4000/M5000/M8000/M9000 Servers RCI Build Procedure and the SPARC
Enterprise M3000/M4000/M5000/M8000/M9000 Servers RCI User's Guide.
1. This refers to the server which has the black-colored chassis and is exclusively bearing the Fujitsu logo on the
front surface.