Fujitsu SPARC Enterprise M3000

102 SPARC Enterprise Mx000 Servers Product Notes for XCP Version 1121 • February 2016
To use the RCI function, see the SPARC Enterprise
M3000/M4000/M5000/M8000/M9000 Servers RCI Build Procedure and the SPARC
Enterprise M3000/M4000/M5000/M8000/M9000 Servers RCI User’s Guide.
To use the APCS, see the Enhanced Support Facility User’s Guide for Machine
Administration Automatic Power Control Function (Supplement Edition).
Limitation for 1027A-Z/X1027A-Z
For 1027A-Z/X1027A-Z, PCIe Dual 10 Gigabit Ethernet Fiber XFP cards, this
maximum limit apply:
■ No more than one card in an M3000 server.
Limitation for 4447A-Z/X4447A-Z
For PCIe Quad-port Gigabit Ethernet UTP Low Profile Adapter (4447A-Z/
X4447A-Z), this maximum limit apply:
■ No more than four cards in an M3000 server.
Patches for Emulex PCI Express (PCIe) Adapters
The following Emulex PCIe adapters require drivers supplied in patch 120222-26:
■ Sun StorageTek Enterprise Class 4Gb Dual-Port Fibre Channel PCIe HBA
(XSEFC402AF)
■ Sun StorageTek Enterprise Class 4Gb Single-Port Fibre Channel PCIe HBA
(XSEFC401AF)
TABLE 4-1 RCI and APCS Control with Mode Switch
Function Mode Switch
Locked Service
RCI Remote power-on/power-off
operations are enabled.
Remote power-on/power-off
operations are disabled.
APCS Automatic power-on/power-off
operations are enabled.
Automatic power-on is disabled, but
power-off remains enabled.