107
CHAPTER
5
Information About Hardware of
M4000/M5000 Servers
This section describes the special instructions and the issues about the
M4000/M5000 servers hardware.
■ “Notes and Limitations” on page 107
■ “Hardware Issues and Workarounds” on page 110
■ “Hardware Documentation Updates” on page 110
Notes and Limitations
Notes on Server Installation
The plug (NEMA L6-20) of the power cables supplied with the M4000/M5000
servers has the following dimensions.
Confirm in advance that the plug does not become an obstruction when plugged
into the input power source at the installation site.
■ Outside diameter of the connector part of the plug: 50 mm
■ Maximum outside diameter of the plug cover: 57 mm
■ Plug cover length from the connector end: 69.9 mm
To Next Page
Loading...
