Fujitsu STYLISTIC Q5010 User Manual

Security functions
Protecting BIOS Setu p Utility (supervisor and user password)
If you have opened these operating instructions on the screen , we
recommend th at you print them out. You cannot call the instructions onto
the screen while y ou are setting up the password.
BIOSSetupUtility
The supervisor password and the u ser password both pre vent unauthorised use o f the BIOS Setup
Utility. With the aid of the supervisor password you can access all of the functions of the BIOS
Setup Utility , while the user password will only give you access t o some of the functions. You
can only set up a user password if a supervisor password has already been assigned.
Please refer to section "Settings in BIOS Setup Utility", Page 65 for a description
of how to call up and operate the BI OS-Setup-Utility.
Setting supervisor and user password
► Start the BIOS Setup
Utility and go to the Security menu.
► Select the Set Supervisor Password field and press the Enter key.

With Enter new Pass
word: you are asked to e nter a password.
► Enter the password and press the Enter key.

Confirm new Passwo
rd requires you to confirm the password.
► Enter the password again and press the En ter key.

Changes have be
en saved is a c onfirmation that the new password has been saved.
► To set th e user password, select Set User Password and proceed exactly as
when configuring the supervisor password.

Ifyoudonotwa
nt to change any other settings, you can exit BIOS Setup Utility.
► In the Exit menu, select the option Save Changes & E xit.
► Select Yes an
d press the Enter key.
PasswordSupervisor passwordUserpassword

The Tablet PC is rebooted and the new password is effective. It will now be necessary to
first enter your supervisor or user password in order to ope n the BIOS Setup Utility. Please
note that the user password only provides access to a few of th e BIOS settings.
Changing t
he supervisor or user password
You can only change the supervisor password when you have logged into the
BIOS Setup Ut ility with the supervisor password.
Passwo
rd
Superv
isorpassword
Userpa
ssword
► Call the BIOS Setup Utility andgototheSecurity menu.
► When cha
nging the password, proceed exactly as for password assignment.
56 Fujitsu

Fujitsu STYLISTIC Q5010 Specifications

General

HD type	WUXGA
Display diagonal	10.1 \
Touchscreen type	Capacitive
Anti-glare screen	Yes
Display brightness	500 cd/m²
Display resolution	1920 x 1200 pixels
Native aspect ratio	16:9
Processor cores	4
Processor family	Intel® Pentium® Silver
Processor frequency	1.1 GHz
Processor manufacturer	Intel
Processor boost frequency	3.1 GHz
Storage media	eMMC
Compatible memory cards	MicroSD (TransFlash), MicroSDHC, MicroSDXC, SD, SDHC, SDXC
Maximum memory card size	512 GB
Internal storage capacity	256 GB
Internal memory	8 GB
Memory clock speed	2400 MHz
Internal memory type	LPDDR4-SDRAM
Platform	Windows
4G standard	LTE
Wi-Fi standards	802.11a, 802.11b, 802.11g, Wi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac)
Bluetooth version	5.0
Top Wi-Fi standard	Wi-Fi 5 (802.11ac)
Wi-Fi data rate (max)	1733 Mbit/s
Mobile network generation	4G
Audio system	Realtek ALC255
Number of built-in speakers	2
Device type	Tablet PC
Form factor	Slate
Product color	Black
Protection features	Dust resistant, Water resistant
International Protection (IP) code	IP54
Certification	MIL-STD-810H, WEEE, HCT / HCL entry / WHQL
Accelerometer	-
Password protection type	BIOS, HDD, Supervisor, User
Personal info management (PIM)	Alarm clock, Calculator, Calendar
HDMI ports quantity	0
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity	1
Battery capacity	- mAh
Battery life (max)	10 h
Rear camera type	Single camera
Rear camera resolution (numeric)	8 MP
Front camera resolution (numeric)	2 MP
Embedded options available	No

Weight and Dimensions

Depth	168.9 mm
Width	262.8 mm
Height	12.4 mm
Weight	605 g