Furuno DSC-60 - Print out Setup

4-9
2.5 Print out setup
This item sets whether DSC transmitting/receiving messages and daily test results are printed out or
not.
Pressing [#/SETUP] key reveals “Setup menu” screen. Select “PRINT OUT”, and press [ENT] key.
Then, the following “Print setup” screen appears.
1. XMTD CALL (Default setting: MANUAL)1. XMTD CALL (Default setting: MANUAL)
1. XMTD CALL (Default setting: MANUAL)1. XMTD CALL (Default setting: MANUAL)
1. XMTD CALL (Default setting: MANUAL)
This item sets whether transmitted DSC messages are automatically printed out or not.
It is better to set this item at “MANUAL”.
2. RCVD CALL (Default setting: MANUAL)2. RCVD CALL (Default setting: MANUAL)
2. RCVD CALL (Default setting: MANUAL)2. RCVD CALL (Default setting: MANUAL)
2. RCVD CALL (Default setting: MANUAL)
This item sets whether received DSC messages are automatically printed out or not.
It is better to set this item at “AUTO”, when printer is connected.
3. D3. D
3. D3. D
3. D
AILAIL
AILAIL
AIL
Y Y
Y Y
Y
TEST CALL (DefTEST CALL (Def
TEST CALL (DefTEST CALL (Def
TEST CALL (Def
ault setting:ault setting:
ault setting:ault setting:
ault setting:
MANU MANU
MANU MANU
MANU
AL)AL)
AL)AL)
AL)
This item sets whether daily test results are automatically printed out or not.
Note)
When daily test results, transmitted messages, and received messages are automatically
printed out, the date and time included in NMEA ZDA sentence are also printed.
If the ZDA is not received regardless of “INPUT TYPE” setting, they are not printed.
2. System setup(PRINT OUT)
* * Print setup * *
XMTD CALL
RCVD CALL
DAILY TEST CALL
MANUAL
AUTO
: MANUAL
: AUTO
: MANUAL