Furuno DSC-60 - Chapter 2 Block Description; Overview of Front Panel

2-1
DSC/WATCH RECEIVER DSC-60
VOLUME
OVEN
POWER
ALARM
CANCEL
CALL
123
456
789
0#*
RT
2182
DSC
ABC
TEST
DEF
IntCom
GHI
ACK
JKL
SCAN
MNO
PQRS
PRINT
TUV WXYZ
FILE LOG
SETUP
DISTRESS
ENT
Chapter 2 Block Description
1. Overview of front panel
Functions of respective keys are described below. Each key serves to enter numeric/alphabet and
change function. Numeric input is used for inputting numeric of data, and Numeric/Alphabet input is
used for inputting a file name when registering a message.
- [TEST/3/DEF] : Daily test
- [IntCom/4/GHI] : ON/OFF of INTERCOM on radiotelephone setting screen
- [ACK/5/JKL] : Switching Auto/Manual of ACK on DSC normal (standby) screen
- [SCAN/6/MNO] : ON/OFF of scanning of DSC general frequencies on DSC standby
screen
- [SOUND/7/PQRS] : ON/OFF of buzzer and external speaker
- [PRINT/8/TUV] : Printing of communication log, registred file, and send/receive message
- [DIMMER/9/WXYZ] : Adjustment of dimmer and contrast of LCD
- [LOG/0] : Opening LOG file of sent and received messages on DSC standby screen
- [*FILE] : Opening SEND MESSAGE FILE on DSC standby screen
- [#SETUP] : Opening SETUP MENU on standby or setting screen
DSC standby screen changes into radiotelephone
setting screen, and frequency changes into J3E
2182 kHz when the [RT 2182] key is pressed for
more than 2 seconds.
Radiotelephone setting screen
changes into DSC standby screen,
when the [DSC ABC] key is
pressed.
WATCH KEEPING
DISTRESS
ROUTINE
AUTO ACK
VOLUME
2187.5 4207.5 6312.0
16804.5 12577.0 8414.5
2177.0 4219.5 6331.0
16903.0 12657.0 8436.5
32
45 00.000N 135 00.000E 23:59
VOLUME 32
TX : 12 329.0 kHz
RX : 13 17600 kHz
POWER : HIGH
TUNE : NO TUNE
MODE : TELEPHONE
CH:12034
1
RT
2182
2
DSC
ABC