Furuno DSC-60 - Chapter 3 Location of Parts; Location of Parts; Front Panel; Rear Panel

3-1
Chapter 3 Location of Parts
1. Location of parts
1.1 Front Panel
1.2 Rear Panel
LCD
Distress Alert Button
OVEN
OVEN LED of reference
oscillator of RX board
ALARM
- Receiving distress/emergency message: Flashing in red
- Receiving safety message: Fashing in green
- Receiving ship’s business/routine: Slow flashing in green
Cursor pad
Power SW and Buzzer
NMEA
Choice of RS-422 or C-Loop
(GGA,RMC,RMA,GLL,ZDA)
ANT
DSC watch keeping
receiver antenna terminal
24V DC
- 24V +30%, -10%
- Overvoltage protection functions
when 35V approx. is input
- Overcurrent protection functions
when 3.1A approx. is input
D.ANT
DSC general watch keeping
receiver antenna terminal
PRINTER
Compatible with
CENTRONICS
DMC
Choice of RS-232C(MIF) or
RS-422(C-Loop)
NBDP
Choice of RS-232C(MIF) or
RS-422(C-Loop)
RCV.BZ SP
2W/4 ohms
GND Terminal
RT
Choosing RS-232C(MIF)
or RS-422(IEC)
Handset