Furuno DSC-60 - Setting the Receiver Board

4-21
2. System setup(Setting DIP Swithes)
3.5 Setting the receiver board
A FAX-5+2.6m whip active antenna is usually used to receive DSC distress signal and DSC general
signal.
Set J3 on the RX board to ACTIVE to apply voltage to the antenna.
J2
ANT
J3
ACTIVE
455kHz
FIL
Ref.OSC
ACTIVE
RX
05P0703
J3 Setting : ACTIVEJ3 Setting : ACTIVE
J3 Setting : ACTIVEJ3 Setting : ACTIVE
J3 Setting : ACTIVE