6. WEB FUNCTIONS
6-25
*1
: Store user name and password in log. They are required to connect to the internet
via PPPoE.
*2
: FELCOM 500 only.
Session setting screen (basic)
Click [Basic] on the session setting screen to show the basic PPPoE settings screen.
(Confirmation) Enter PPPoE password.
Service Select the service to use, among Standard, 8kbps, 16kbps,
32kbps, 64kbps, 128kbps, 256kbps
*2
.
IP address for PPPoE Display IP address of PPPoE server. Enter IP address of
PPPoE client (*.*.*.0,*.*.*.255. Do not set same IP address
as communication unit.)
Add button Register data. The PPPoE entry screen appears.
Cancel button Restore previous settings of this screen.
Item Description
Session name
Session name Display, edit name of session.
Apply button Apply session name. (Not available during data connection.)
Cancel button Restore previous settings. (Not available during data connection.)
Username & Password for PPPoE
Username for
PPPoE
Display, edit user name for PPPoE. (Not available during data con-
nection.)
Password for
PPPoE
Display, edit password for PPPoE. (Not available during data con-
nection.)
(Confirmation) Enter PPPoE password.
Apply button Apply username, password. (Not available during data connection.)
Cancel button Restore previous settings. (Not available during data connection.)
Data connection service
Service name Display, edit service to use. (Not available during data connection.)
Apply button Apply service name. (Not available during data connection.)
Cancel button Restore previous settings. (Not available during data connection.)
Disconnect button Disconnect data connection. (Not available before data connec-
tion.).
Item Description
To Next Page
Loading...
Need help?
General
