Furuno FELCOM 250 - User Manual

Other manuals for Furuno FELCOM 250

Service Manual462 pages

Installation Manual66 pages

Questions and Answers

J
Jennifer WardSep 10, 2025
Why is the incoming indicator silent on my Furuno Boating Equipment?
- S
  Stacey WallaceSep 10, 2025
  If the incoming indicator on your Furuno Boating Equipment does not sound: * Check that the cable between the incoming indicator and the Communication unit is correctly connected. * Adjust the incoming indicator volume by pressing S to increase the volume. * In the Web software, go to Settings ? Basic settings ? Incoming indicator (enabled service) and check if Voice (telephone), FAX, ISDN UDI, ISDN RDI (UDI/ RDI FELCOM 500 only) are checked.
B
Bradley CookSep 9, 2025
Why can't I use the internet with my Furuno Boating Equipment?
- X
  xbishopSep 9, 2025
  If you cannot use the internet with your Furuno Boating Equipment: * Check that the handset screen displays [D: Connected] and the Web software displays [Data connection Connected]. * Check the internet connection settings on your PC.
J
Jamie EscobarAug 22, 2025
How to troubleshoot no power issue on Furuno Boating Equipment?
- J
  Jennifer DavisAug 22, 2025
  If the POWER lamp on the communication unit of your Furuno Boating Equipment does not illuminate, indicating no power, there are several things to check: * Verify the fuse hasn't blown. * Ensure the power connector is securely fastened. * Inspect the power cable for rust or damage. * Confirm the ship's battery voltage is within the range of 10.8 - 31.2V DC.
C
christopher24Sep 6, 2025
What to do if Furuno Boating Equipment does not become ready status?
- T
  Todd LeonardSep 6, 2025
  If your Furuno Boating Equipment does not reach [Ready] status, consider the following: * Ensure the antenna cable is properly connected. * Confirm there are no obstructions blocking the signal between the antenna and the satellite. * Use the Web software to perform a manual satellite search via Main ? satellite search. * Verify that the ship position data is correct (check for “No fix” or “No data” messages). * In the Web software, navigate to Settings ? Basic Settings ? GPS to ensure the backup GPS is set correctly.
T
Tammy CampbellSep 4, 2025
What to do if my Furuno Boating Equipment has no power?
- A
  Alexander SweeneySep 4, 2025
  If the POWER lamp on the communication unit of your Furuno Boating Equipment doesn't illuminate, try the following: * Check if the fuse has blown. * Check if the power connector has loosened. * Check if the power cable is rusted or damaged. * Check if the power cable is damaged. * Verify that the voltage of the ship battery is within the range of 10.8 - 31.2V DC.
K
Krystal PettySep 2, 2025
What to do if Furuno Boating Equipment takes a lot of time to communicate with fax?
- W
  wwalshSep 2, 2025
  To address the issue of slow fax communication with your Furuno Boating Equipment, activate the safety communication mode on FAX-2840, referring to the operator’s manual of the fax.
B
Bryan ParsonsSep 1, 2025
How to stop wavy printing of the fax with Furuno Boating Equipment?
- M
  Michael LewisSep 1, 2025
  To reduce the vibration causing wavy printing on faxes from your Furuno Boating Equipment, place anti-vibration material under the fax machine.
S
Stacy BradfordAug 31, 2025
Why is incoming indicator silent on Furuno Boating Equipment?
- K
  Kelly RandallAug 31, 2025
  To address the issue of the incoming indicator not sounding on your Furuno Boating Equipment: * Check that the cable between the incoming indicator and the Communication unit is correctly connected. * Adjust the incoming indicator volume by pressing S to increase it. * In the Web software, navigate to Settings ? Basic settings ? Incoming indicator (enabled service) and verify if Voice (telephone), FAX, ISDN UDI, ISDN RDI (UDI/RDI FELCOM 500 only) are checked.
D
Dakota WillisAug 30, 2025
How to fix internet connection issues on Furuno Boating Equipment?
- J
  Jonathan RichardsAug 30, 2025
  To resolve the issue of being unable to use the internet on your Furuno Boating Equipment, check that the handset screen displays [D: Connected] and the Web software displays [Data connection Connected]. Also, check the internet connection settings on your PC.
C
Courtney DominguezAug 28, 2025
What to do if Furuno Boating Equipment handset keys do not respond?
- I
  irussoAug 29, 2025
  To resolve the issue of the handset keys not responding on your Furuno Boating Equipment, push and hold the key for 3 seconds to restart the handset. If the keys still do not respond after the restart, it is recommended to contact your dealer.

Summary

SAFETY INSTRUCTIONS

General Safety Precautions and Warnings

Essential safety warnings, cautions, and guidelines for operating the equipment safely.

Specific Safety Warnings and Labels

Warnings about radome, LCD handling, and information on equipment warning labels.

SYSTEM CONFIGURATION

BASIC OPERATION

Handset and Communication Unit Overview

Screen Layout and Menu Navigation

Internet Connection and Password Management

HANDSET OPERATIONS

Making, Receiving, and Managing Calls

Detailed guide to call operations, including history and contacts.

SMS Message Handling

Procedures for logging in, sending, receiving, and managing SMS messages.

Web Browser Usage

Connecting to the internet, viewing web pages, managing favorites, and handling URLs.

SETTINGS FOR HANDSET

SMS and Web Browser Settings

Network and SIP Settings

Configuring network parameters (LAN, WAN, PPPoE) and SIP server settings.

Password, Notifications, and Special Functions

WEB SOFTWARE

Opening, Closing, and Screen Navigation

Status Monitoring and Data Connection Management

Contacts Management via Web Software

SMS Handling via Web Software

Managing SMS messages, including sending, receiving, and box organization.

SIM Card, Satellite Search, and Log Management

WEB FUNCTIONS

Communication Unit Settings and Administrator Login

PBX, Extension, and Group Settings

Network Settings: LAN, WAN, PPPoE, and Security

PC Connection Setup for PPPoE

MAINTENANCE AND TROUBLESHOOTING

Periodical Maintenance and Fuse Replacement

LED Indicators and Troubleshooting Common Issues

Interpreting LED status lights and resolving common operational problems.

Self-Tests and Error;Warning Message Interpretation

Performing self-tests and understanding system error and warning messages.

Restoring Defaults and Viewing System Information

Furuno FELCOM 250 Specifications

General

Operating Temperature	-15°C to +55°C
Communication System	Inmarsat
Data Reporting	Yes
Tracking	Yes
Voice Support	Yes
SMS Support	Yes
Frequency	1.6 GHz
Power Supply	12-24 VDC
Interface	Ethernet