FUTABA 3VCS - Page 80

81
Functions
(Initial screen)
Use the or
button to select the
menu screen.
Press the button.
Use the or
button to select the
function.
Press the button.
Calling the setup screen
* When the direct call button is set,
the setup screen is also called by the
following method:
MENU SELECT
DIRECT SEL
Press the and
button simulataneously.
Press the button set
at this function.
* Calling from menu screen
Use the or button to
select the setup item.
* blinks at the current
setup item.
(Initial screen)
MENU
Adjustment buttons
- Use the (+) and (-) buttons to make
adjustments.
- Press the (+) and (-) buttons simul-
taneously (approx. 1 sec) to return to
the initial screen.
Function select dial setup
1 (Setup item selection)
Use the (DN) or (UP) button to select the item to
be set.
2 (When changing function)
Use the (DN) or (UP) button to select the func-
tion.
- See the preceding page for the function abbreviations.
(When setting the step amount)
Use the (+) or (-) button to set the step amount.
- See the preceding page for the relationship between set value and step
amount.
(When changing the direction of operation)
Use the (+) or (-) button to switch the direction.
3 When ending setup, return to the initial screen by
pressing the (END) button 3 times.
* Setup item shifts in function -> step
amount -> direction of operation order
Function selection
Direction of operation setting
Step amount setting
Function select dial/FUNC-DIAL