FUTABA 3VCS - Page 84

85
Functions
Dual rate adjustment
(Preparation)
- When using the 2nd dual rate function, use the function
select switch function
(See page 82) to preselect the switch.
1 (Dual rate adjustment)
Use the (+) and (-) buttons to adjust the steering
angle.
- This dual rate steering angle is linked with the grip dial.
2 (2nd dual rate adjustment)
Select setup item "2ND D/R RATE" by pressing
the (DN) button once, and use the (+) and (-) but-
tons to adjust the steering angle.
- When the switch is switched, the rate display right ON/OFF display
changes. The "ON" display side becomes the steering angle during the
current operation.
3 When ending adjustment, return to the initial
screen by pressing the (END) button 3 times.
D/R rate
0~100%
Initial value: 100
2ND D/R rate
0~100%
Initial value: 100
Dual rate/ST-D/R (Steering system)