Galil DMC-2X00 - Function Keys; Input;Output of Data - DMC-2 X00 Commands

Default Configuration:
Baud Rate 9600
Data bits 7
Parity Ignore PE
Display enabled
Repeat Fast
Echo Disabled
Handshake Disabled
Self Test Disabled
Key Click - Disabled <Ctrl>Space <Shift> [2,2]
Key Click - Enabled <Ctrl>Space <Shift> [1,2]
Clear Display and Home <Ctrl>Space <Shift> [5,6]
Function Keys
<CNTRL><SHIFT>F3 Allows function keys to be configured; Follow prompts on display to change
function keys
Default Function Keys
F1 22 decimal
F2 23 decimal
F3 24 decimal
F4 25 decimal
F5 26 decimal
Input/Output of Data – DMC-2x00 Commands
Refer to Chapter 7 in this manual for Data Communication commands.
When using Port 2, use CC command to configure P2.
Example:
CC 9600,0,0,1 Configures P2
MG{P2} “Hello There”, V1{F2.1} Send message to P2
IN{P2} “Enter Value”, NUM Prompts operator for value
Example:
#A
CI 0;CC 9600,0,0,1 #A Interrupt on any key; Configure P2
MG {P2} “press F1 to start X” Print Message to P2
MG {P2} “Press F2 to start Y” Print Message to P2
244 • Appendices DMC-2X00