#B; JP#B;EN End Program
#COMINT Interrupt Routine
JS #XMOVE,P2CH=F1 Jump to X move if F1
JS #YMOVE,P2CH=F2 Jump to Y move if F2
EN1,1 End, Re-enable comm interrupt & restore trip point
#XMOVE;PR1000;BGX;EN Move X routine
#YMOVE;PR,1000;BGY;EN Move Y routine
NOTE: F1 through F5 are used as dedicated keywords for testing function keys. Do not use these as
variables.
6-Pin Modular Connector
1 +5 volts
2 Handshake in
3 Handshake out
4 Data in
5 Data out
6 Ground
9-Pin D Adaptor - Male (For P2)
1 CTS input
2 Transmit Data - input
3 Receive Data - output
4 RTS - output
5 Ground
6 CTS - input
RTS - output
CTS - input
5V or no connect or sample clock with jumpers
NOTE: Out and in are referenced to the terminal.
Ordering Information
TERM-1500H-P2 Hand-held terminal with female adapter
TERM-1500P-P2 Panel Mount terminal with female adapter
DMC-2X00 Appendices y 245
To Next Page
Loading...
Need help?
General
