Galil DMC-2X00 User Manual

All of the command operands begin with the underscore character (_). For example, the value of the
current position on the A axis can be assigned to the variable ‘V’ with the command:
V=_TPA
The Command Reference denotes all commands which have an equivalent operand as "Used as an
Operand". Also, see description of operands in Chapter 7.
Command Summary
For a complete command summary, see Command Reference manual.
DMC-2X00 Chapter 5 Command Basics y 67

Galil DMC-2X00 Specifications

General

Category	Controller
Communication Interface	Ethernet
Encoder Input	up to 12 MHz
Analog Input	12-bit resolution
Operating Temperature	0 to +50 °C
Storage Temperature	-20°C to 70°C
Humidity	5% to 95% non-condensing
Dimensions	38mm