Configuration
19 · G&D DVIMUX2-DL-USB
Configuration
The configuration of the KVM switch can optionally be changed in the setup mode
or in the setup menu:
Enable the setup mode using the console keyboard. You can change the configura-
tion via special setup keys.
The setup menu is operated with a terminal emulator and provides a user interface
to configure the device.
Overview of the functions and default settings
The following table lists functions that can be configured as well as their default set-
tings of the KVM switch.
Detailed description of the functions is given in the following pages:
NOTE:
The USB keyboard type (see page 39) can only be selected in the setup menu
where you can also find the configuration settings of the KVM switch.
Function Default Page
Using single or double hotkeys single hotkeys 23
Changing the single hotkey Ctrl 24
Changing the double hotkey Ctrl+Shift 25
Changing the select keys 1 and 2 26
Enabling/Disabling the hotkey delay 7 seconds 27
Resetting the defaults 28
Auto-accessing the first channel disabled 29
(De)activating the switching via front buttons enabled 29
(De)activating the switching via hotkeys enabled 30
(De)activating the switching via step keys disabled 31
Enabling/disabling switching by mouse disabled 32
Switching channels via keys F21 and F22 disabled 33
Switching between channels using a CORTRON special keyboard disabled 34
Changing the bitrate of the Service port 115.200 35
Changing the standard mode of the Service port Setup Menu 36
Changing the bitrate of the RS232 port 115.200 37
Changing the operating mode of the RS232 port Switch 38
Selecting the USB keyboard type PC Multimedia 39
Enabling/Disabling USB 2.0 data transmission enabled 42
USB pinning disabled 43
To Next Page
Loading...