G&D DVIMUX2-DL-USB - Switching between Channels Using a CORTRON Special Keyboard; G&D Dvimux2-Dl-Usb · 34

Configuration
G&D DVIMUX2-DL-USB · 34
English
Switching between channels using a CORTRON special keyboard
Enable switching between channels using a CORTRON 533-0022A keyboard by pressing
the key combination
MULTIFUNC+A/B on the keyboard. Pressing the key combina-
tion MULTIFUNC+A/B lets you now switch between the channels 1 and 2.
How to enable/disable switching between channels using a
CORTRON special keyboard:
IMPORTANT: In the default settings of the KVM switch switching between chan-
nels using a CORTRON 533-0022A keyboard is disabled.
IMPORTANT: If you have configured the use of double hotkeys (see page 25), sin-
gle hotkeys (see page 24) will automatically be used after you activate this func-
tion.
Setup Menu
1. Use the terminal emulator to establish a connection to the KVM switch.
If the setup menu is not displayed, the Monitoring mode of the service port is
enabled. Enter
»!« to switch to the setup menu.
2. Use the Arrow or Arrow keys to select the row Select Channel via Multi A/B.
3. Press the Space key (repeatedly) to choose between the following options:
No  switching between channels using the key combination
MULTIUNC+A/B disabled
Yes  witching between channels using the key combination
MULTIUNC+A/B enabled
4. Press the S key to save your settings.