Page 81
17) Enter the Zone number you wish to
program the Descriptor for, followed by Yes.
The display will show for example:-
18) Press No. The display will show:-
19) You should now program the Descriptor you
require using the template below for the
key allocation in a similar way that you you would
type a text message on a mobile telephone.
As the desired character is displayed press the
Yes key to move on to the next character.
Continue until the line is complete.
1 2 3
ABC DEF GHI
4 5 6
JKL MNO PQR
7 8 9
STU VWX YZ Space
No 0 Yes
Delete 1234567890 Enter Character
20) As you enter the last character the display
will move on to the next Zone. For example:-
21) Repeat from Step 18 until all the Descriptors
you require have been programmed. Then
press 0 (zero) key twice.
The display will show:-
Zone 001 Name =
Zone 001
Zone 002 Name =
Zone 002
Zone 001 Name >
_
Program Zone
Descriptors ?
PR5892 Rev11 800 Series Eng Ref 15.qxd 16/11/2006 11:21 Page 81
To Next Page
