Edge
®
820
21
EN
It may take 30–60 seconds to locate satellite signals.
Training
Going for a Ride
If your device was packaged with an ANT+ sensor, they are already paired and
can be activated during initial setup.
1 Hold to turn on the device.
2 Go outside, and wait while the device locates satellites.
The satellite bars turn green when the device is ready.
3 From the home screen, select .
4 Select
to start the timer.
Edge 820_SEA英泰印 [4.75x4.75]-7.indd 21 2016/8/27 下午 03:01:29
To Next Page
