Garmin Edge 820 - Advanced Navigation Features; Navigating by Coordinates and Back to Start; Projecting and Editing Locations

Edge
®
820 39
EN
Navigating to Known Coordinates
1 Select Navigation > Search Tools > Coordinates.
2 Enter the coordinates, and select .
3 Follow the on-screen instructions to your destination.
Navigating Back to Start
At any point during your ride, you can return to the starting point.
1 Go for a ride (Going for a Ride, page 21) .
2 During your ride, select anywhere on the screen to view the timer overlay.
3 Select > Navigation > Back to Start.
4 Select Along Same Route or Most Direct Route.
5 Select Ride.
The device navigates you back to the starting point of your ride.
Stopping Navigation
1 Select anywhere on the screen to view the timer overlay.
2 Scroll to the map.
3 Select > .
Projecting a Location
You can create a new location by projecting the distance and bearing from a
marked location to a new location.
1 Select Navigation > Saved Locations.
Edge 820_SEA英泰印 [4.75x4.75]-7.indd 39 2016/8/27 下午 03:01:30