70
Edge
®
820
EN
Customizing Vector Features
Before you can customize Vector features, you must pair a Vector power
meter with your device.
1 Select > Settings > Sensors.
2 Select the Vector power meter.
3 Select Sensor Details > Vector Features.
4 Select an option.
5 If necessary, select the toggle switches to turn on or off torque efficiency,
pedal smoothness, and cycling dynamics.
Updating the Vector Software Using the Edge Device
Before you can update the software, you must pair your Edge device with
your Vector system.
1 Send your ride data to your Garmin Connect account
(Sending Your Ride
to Garmin Connect, page 75)
.Garmin Connect automatically looks for
software updates and sends them to your Edge device.
2 Bring your Edge device within range (3 m) of the sensor.
3 Rotate the crank arm a few times. The Edge device prompts you to install
all pending software updates.
4 Follow the on-screen instructions.
Getting Your FTP Estimate
The device uses your user profile information from the initial setup to esti-
mate your functional threshold power (FTP). For a more accurate FTP value,
Edge 820_SEA英泰印 [4.75x4.75]-7.indd 70 2016/8/27 下午 03:01:34
To Next Page
Loading...
