Edge
®
820
87
TH
Marking Laps by Distance
You can use the Auto Lap feature to mark the lap at a specific distance auto-
matically. This feature is helpful for comparing your performance over differ-
ent parts of a ride (for example, every 10 miles or 40 kilometers).
1 Select
> Settings > Activity Profiles.
2 Select a profile.
3 Select Auto Features > Auto Lap > Auto Lap Trigger > By Distance > Lap At.
4 Enter a value.
5 If necessary, customize the lap data fields
(Customizing the Data Screens,
page 83)
.
Using Auto Pause
You can use the Auto Pause feature to pause the timer automatically when
you stop moving or when your speed drops below a specified value. This fea-
ture is helpful if your ride includes stop lights or other places where you need
to slow down or stop.
NOTE: History is not recorded while the timer is stopped or paused.
1 Select
> Settings > Activity Profiles.
2 Select a profile.
3 Select Auto Features > Auto Pause.
4 Select an option:
• Select When Stopped to pause the timer automatically when you stop
moving.
• Select Custom Speed to pause the timer automatically when your speed
Edge 820_SEA英泰印 [4.75x4.75]-7.indd 87 2016/8/27 下午 03:01:35
To Next Page
Loading...
