Garmin Edge 820 - Bluetooth Settings

88 Edge
®
820
TH
drops below a specified value.
5 If necessary, customize optional time data fields (Customizing the Data
Screens, page 83) .
Using Auto Sleep
You can use the Auto Sleep feature to automatically enter sleep mode after
5 minutes of inactivity. During sleep mode, the screen is turned off and the
ANT+ sensors, Bluetooth, and GPS are disconnected.
Wi-Fi continues to run while the device is asleep.
1 Select > Settings > Activity Profiles.
2 Select a profile.
3 Select Auto Features > Auto Sleep.
Using Auto Scroll
You can use the Auto Scroll feature to automatically cycle through all of the
training data screens while the timer is running.
1 Select > Settings > Activity Profiles.
2 Select a profile.
3 Select Auto Features > Auto Scroll.
4 Select a display speed.
Starting the Timer Automatically
This feature automatically detects when your device has acquired satellites
and is moving. It starts the timer or reminds you to start the timer so you can
record your ride data.
Edge 820_SEA英泰印 [4.75x4.75]-7.indd 88 2016/8/27 下午 03:01:35