Garmin Edge 820 - Creating Round-Trip Courses

Edge
®
820 43
EN
Creating and Riding a Round-Trip Course
The device can create a round-trip course based on a specified distance, start-
ing location, and direction of navigation.
1 Select Navigation > Courses > Round-Trip Course.
2 Select Distance, and enter the total distance for the course.
3 Select Start Location.
4 Select an option:
• To select your current location on the map, select Current Location.
• To select a saved location, select Saved, and select a location.
• To select a location for which you recently searched, select Recent Finds,
and select a location.
• To select a location on the map, select Use Map, and select a location.
• To browse for and select a point of interest, select POI Categories, and
select a nearby point of interest.
• To select a city, select Cities, and select a nearby city.
• To select an address, select Addresses, and enter the address.
• To select an intersection, select Intersections, and enter the street names.
• To use coordinates, select Coordinates, and enter the coordinates.
5 Select Start Direction, and select a direction heading.
6 Select Search.
TIP: You can select to search again.
7 Select a course to view it on the map.
Edge 820_SEA英泰印 [4.75x4.75]-7.indd 43 2016/8/27 下午 03:01:32