Setting Up the Gauges
Configuring the Number of Engines
1 From a gauges screen, select Options > Num. Engines.
2 Select the number of engines.
Configuring the Tank Level Sensors
1 From a gauges screen, select Options > Tank Preset.
2 Select a tank level sensor to configure.
3 Select Name, enter a name, and select Done.
4 Select Type, and select the type of sensor.
5 Select Style, and select the style of sensor.
6 Select Tank Capacity, enter the capacity of the tank, and select Done.
7 Select Calibration, and follow the on-screen instructions to calibrate the tank levels.
If you do not calibrate the tank levels, the system uses default settings for the tank levels.
Changing the Data Shown
1 From a data screen, hold a customizable item.
2 Select a data type.
3 Select the data to display.
124 Gauges and Graphs
To Next Page