10 TUNING THE CHASSIS
28
F02184-11
– Push the splash protector to the side.
–
Using an open end wrench, turn adjusting screw
1
clockwise all
the way.
Info
Do not loosen fitting
2
!
– Turn counterclockwise by the number of turns corresponding to the
shock absorber type.
Guideline
High-speed compression damping
Comfort 2.5 turns
Standard 2 turns
Sport 1.5 turns
Info
Turn clockwise to increase damping; turn counterclockwise
to reduce damping.
– Position the splash protector.
10.6 Adjusting the rebound damping of the shock absorber
Caution
Risk of injury Parts of the shock absorber will move around if the shock absorber is detached incorrectly.
The shock absorber is filled with highly compressed nitrogen.
– Please follow the description provided. (Your authorized GASGAS Motorcycles workshop will be glad to help.)
F02185-10
–
Turn adjusting screw
1
clockwise up to the last perceptible click.
– Turn counterclockwise by the number of clicks corresponding to the
shock absorber type.
Guideline
Rebound damping
Comfort 17 clicks
Standard 15 clicks
Sport 13 clicks
Info
Turn clockwise to increase the damping; turn counterclock-
wise to reduce damping when the shock absorber rebounds.
To Next Page
Loading...
Need help?
General
