GAS GAS MC50 2021 User Manual

12 BRAKE SYSTEM
74
F02206-10
–
Mount and tighten screw
3
.
Guideline
Screw, rear brake
caliper
M6x16 10 Nm (7.4 lbf ft)
Loctite
®
243™
–
Mount and tighten screw
4
.
Guideline
Screw, rear brake
caliper
M6x40 10 Nm (7.4 lbf ft)
Loctite
®
243™
–
Mount and tighten screw
2
.
Guideline
Screw, brake linings M5 8 Nm (5.9 lbf ft)
–
Mount lock ring
1
.
–
Check the brake discs. ( p. 62)
– Operate the foot brake lever repeatedly until the brake linings are in
contact with the brake disc and there is a pressure point.
H01654-10
–
Add brake fluid up to level
A
.
Guideline
Level
A
(brake fluid level
below reservoir rim)
10 mm (0.39 in)
Brake fluid DOT 4 / DOT 5.1 ( p. 108)
– Position cover with washer and membrane.
– Mount and tighten the screws.
Info
Use water to immediately clean up any brake fluid that has
overflowed or spilled.
Finishing work
–
Remove the motorcycle from the lift stand. ( p. 37)

GAS GAS MC50 2021 Specifications

General

Brand	GAS GAS
Model	MC50 2021
Category	Motorcycle
Language	English