15-
10
750/760 Feeder Management Relay GE Power Management
15.5 FACTORY SERVICE 15 S8 TESTING
15
15.5 FACTORY SERVICE 15.5.1 DESCRIPTION
These messages are intended for factory use only, to perform testing and diagnostics. Entering the factory ser-
vice passcode in the first message allows access to the command messages.
15.5.2 SETPOINTS
■ FACTORY SERVICE
■ [ENTER] for more
The
FACTORY SERVICE
setpoints path is:
\ SETPOINTS \ S8 TESTING \ FACTORY SERVICE
ENTER FACTORY
PASSCODE: ■
(Restricted Access For Factory Personnel Only)
To Next Page
Loading...
