EasyManua.ls Logo

GE AF-650 GP - Signal Test Board (p;n 6 KAF6 H8437); Signal Test Board Pin Outs and Voltage Levels

GE AF-650 GP
215 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
PB-71 Profibus Save Data Values
Option: Function:
Parameter values changed via Profibus are not automatically stored in non-volatile memory. Use this
parameter to activate a function that stores parameter values in the EEPROM non-volatile memory, so
changed parameter values will be retained at power-down.
[0] * Off Deactivates the non-volatile storage function.
[1] Store all setups Stores all parameter values for all set-ups in the non-volatile memory. The selection returns to Off [0]
when all parameter values have been stored.
[2] Store all setups Stores all parameter values for all set-ups in the non-volatile memory. The selection returns to Off [0]
when all parameter values have been stored.
PB-72 ProfibusDriveReset
Option: Function:
[0] * No action
[1] Power-on reset Resets frequency converter upon power-up, as for power-cycle.
[3] Comm option reset Resets the Profibus option only, useful after changing certain settings in parameter group PB-##, e.g. par.
PB-18 Node Address.
When reset, the frequency converter disappears from the Network, which may cause a communication
error from the master.
PB-80 Defined Parameters (1)
Array [116]
No Keypad access
Read only
Range: Function:
0* [0 - 115] This parameter displays a list of all the defined frequency converter parameters available for Profibus.
PB-81 Defined Parameters (2)
Array [116]
No Keypad access
Read only
Range: Function:
0* [0 - 115] This parameter displays a list of all the defined frequency converter parameters available for Profibus.
PB-82 Defined Parameters (3)
Array [116]
No Keypad access
Read only
Range: Function:
0* [0 - 115] This parameter displays a list of all the defined frequency converter parameters available for Profibus.
PB-83 Defined Parameters (4)
Array [116]
No Keypad access
Read only
Range: Function:
0* [0 - 115] This parameter displays a list of all the defined frequency converter parameters available for Profibus.
PB-84 Defined Parameters (5)
Range: Function:
0* [0 - 115] This parameter displays a list of all the defined frequency converter parameters available for Profibus.
AF-650 GP Programming Guide
130
3

Table of Contents

Other manuals for GE AF-650 GP

Related product manuals