Step Action
2 Hang the column tubing on the valves so it is supported by the column
v
alves located on the right side of the system.
3 Insert the tubing in the column valves starting from the top and close the
v
alves.
4 Connect the column tubing to the air trap tubing with a TC clamp.
Make sure that the fastening handle of the TC clamp is facing outwards.
5 Preparation
5
.2 Install disposable flow kits
114
ÄKTA ready XL Operating Instructions 29281616 AE
*** TeDIS Valid on Date Printed Printed on: 15-09-2023 11:27:35 ***
To Next Page
Loading...
