Step Action
5 Insert and fasten the rigid Krohne™ tube on the outlet tubing into the flow
m
eter FE-141 located in the indention on the right side of the system.
a. Open the tube holder (A).
b. Insert the rigid Krohne tube (B).
c. Close the tube holder (C). A click verifies that the tube holder is closed.
5 Preparation
5
.2 Install disposable flow kits
ÄKTA ready XL Operating Instructions 29281616 AE 117
*** TeDIS Valid on Date Printed Printed on: 15-09-2023 11:27:35 ***
To Next Page
Loading...
