Step Action
6 Make sure to position the outlet manifold tubing on the left side of the
h
ook.
Install system components to the
f
low kit
Step Action
1 Locate the level sensor fixture (with level sensors L
EL-166 and LEL-167),
the lever, and the strap on the system.
Note:
Note that the level sensor fixture, level sensors, lever, and the strap are reus-
able parts of the system. Do not remove these items when removing the
flow kit.
5 Preparation
5
.2 Install disposable flow kits
118
ÄKTA ready XL Operating Instructions 29281616 AE
*** TeDIS Valid on Date Printed Printed on: 15-09-2023 11:27:35 ***
To Next Page
Loading...
