Step Action
2 Fit the reusable level sensor fixture to the air trap using the strap (A).
T
ighten the fixture to the air trap using the lever (B). The base of the level
sensor should be positioned flush to the air trap rim.
3 Fit the air trap vent tubing into the air trap vent valve, X
V-023, and close
the valve lock.
5 Preparation
5
.2 Install disposable flow kits
ÄKTA ready XL Operating Instructions 29281616 AE 119
*** TeDIS Valid on Date Printed Printed on: 15-09-2023 11:27:35 ***
To Next Page
Loading...
